GLOBAL RENAISSANCE & ENGINEERING 
Your Subtitle text
Solar Power Crosswalks
Solar Power Pedestrian Activated Crosswalks has the following features:

  • Cost Savings. The systems are designed to minimize costly installation time. The total installed cost of an active Flashing Beacon system is just 20% of a traditional hardwired system.
  • Wireless Communication for Pedestrian Pushbuttons. Pedestrian-activated pushbutton once activated sends a wireless signals to flasher units. Therefore, no wiring is needed for individual and adjacent units.

 

  • No External Power Required. Because the flasher runs on solar power and batteries, there is no need for costly trenching for electrical utility service.
  • Inconspicuous Design - No Control Cabinet. The Flashing Beacon system has been designed to look like standard traffic signal hardware. Most solar-powered systems are prone to vandalism due to their large visible solar panel. The Flashing Beacon has small solar panels mounted on top of the structure, which are not visible from the ground.  All of the electronics and battery pack are contained inside the signal head. A traffic control cabinet is not required.  

  • Performance.  The flashing beacon has been verified through field tests to provide 300 20-second LED flash cycles per day for one month of continuous operation without any solar recharging.

  • 3-5 Year Service Life.  Each signal module is powered by a rechargeable battery pack, which is charged during the day by the solar panels, even under low light conditions. The battery pack has a service life of 3-5 years under normal operating conditions. The battery pack is mounted in the signal head and is easily serviced and replaced. 

 

 



Solar-Powered Pedestrian-Activated Crosswalks



Also check out our
Solar-Powered STOP SIGNS!

Content copyright . Gary Gray. All rights reserved.
Web Hosting Companies